BRASS FITTING - 1

 This section is devoted to extra fine brass fittings. Ideal for the scratch builder or the modeller you wishes to inhance a new kit by replacing certain fittings with extra high quality ones. Where possible all fittings as operational.

BRASS SHIEVES

Solid brass shieves available in various sizes and types.


 SIZEQUANTITY
 MATERIALPRICE
    
 


 
 3.0 MM
2
 BRASS £0.75
 4.0 MM
2
 BRASS £0.75
 5.0 MM
 2 BRASS £0.75
 6.0 MM
 2 BRASS £0.75


ALL THE ABOVE HAVE A 1.0MM BORE.

                                      

BRASS SHIPS BELLS.

Three Ships bells. The smaller unit is turned brass while the larger units arepressed brass plated steel with a solid brass ring. These are very nice units.

 SIZE/DIA MATERIAL PRICE 
    
 5.0MM TURNED BRASS
 £0.75 
    
 11.0MM BRASS PLATED STEEL AND TURNED BRASS MOUNTING. NOT SHOWN SAME AS 10.0MM TYPE.
 £1.25 
    
 12.0MM BRASS PLATED STEEL AND TURNED BRASS MOUNTING
 £1.25 
    


BRASS ELBOW UNIT.

Here we have a brass elbow joint comprising a male and female joint as well as a miniture fixing. All items are brass, supplied assembled.

These  are ideal for fitting to the base of booms to make them operational on derricks etc.             

Supplied assembled for only £ 2.00.  

BRASS SHACKLES, FULLY OPERATIONAL.

Fully working machined brass shackles. These are superb units and have many uses in model making.

 SIZE MATERIAL TYPE QUANTITYPRICE 
     
 7.0 X 4.0 MM BRASS THREADED 1 £1.10
 10.5 X 6.0MM BRASS PIN 1 £1.10
 12.2 X 7.6MM BRASS THREADED 1£1.60
 12.2 X 7.6MM BRASS PIN 1£1.60 
 12.2 X 7.6MM BRASS NUT 1 £1.80
15.0 X 11.0MM  BRASS THREADED 1£2.20
 15.0 X 11.0MMBRASS PIN   1 £2.20
    
 
   
     
      
     
 
    


ANCHOR SHACKLE.

ANCHOR SHACKLES PRICED AT ONLY £1.60 EACH


 SPECIAL SHACKLE.

Here we have a new ( FEB 2017) HEAVY DUTY metal shackle. These are very suitable 14th, 12th, 10th scale models. The units a finished in a red finish that is very durable. They are threaded hence are very secure when fitted. The threaded pin has a hole in it so that a lanyard can be made by the modeller to fit to the unit. Size is 18.5 x 12.0 mm. Pin is 4.0mm thick.

MOUNTING BRACKET.

Here we have a new mounting bracket (FEB 2017. ) in metal and powder coated on red. Supplied with four mounting nuts and cross headed chromed screws. These units are ideal as deck brackets on larger models and look great at 14th, 12th and 10th scale. Base size is 13mm square. The total height of the mounting lug including the base is 9.0mm. These units are to a very high finish. I only have limited number as I want to see what the demand is for these before getting more in.

 LARGE HOOK FOR TUG TOWING.

Here we have a large hook with two mounting flanges making it ideal for mounting on model tugs. It would be suitable for 1/32 scale and 1/24th scale applications. The hook is 21.0mm long and 14.0mm high and is 4.0mm thick. It has a throat 4.0mm throat making this ideal for towing with 4mm cordage. This unit is the best hook I have ever seen for scale models, they are supplied powder coated in red and come will a stainless steel cap bolt and nut. (FEB 2017).

WIRE THIMBLES.

Here we have two types of wire thimbles, made from brass. Ideal for making strops. The chemically blackened units will accept wire up to 0.6mm. The brass coloured unit as slightly bigger and will accept wire up to 0.8mm in dia. Once the wires are fitted we strongly recommend whipping the ends to seal them It also makes them look nicely finished. Supplied in packs of 10. Please note that the brass colour units are not shown but are exactly the same shape as the black units but slightly bigger. Both packs are priced at only £1.00 per pack.

BRONZE RIGGING THIMBLE.

.

The whipped thimble is for display only, it is not included with the thimble packs!!!!!

Here we have three sizes of bronze cast rigging thimbles. At the top of the picture you can see an example of one in use after having been whipped to a cable.



EXAMPLE OF THE THIMBLES MADE UP USING OUR COTTON CABLE - MODELLED BY A DUTCH MODELLER - EXCELLENT WORK.
THESE ARE NOT FOR SALE THEY ARE SIMPLY TO SHOW THE THIMBLES IN USE.

SIZE                                                           QUANTITY IN PACK                                  MATERIAL                             PRICE.

SMALL  3.5MM LONG                                               2                                                  BRONZE                               £ 1.25

MEDIUM 6.0MM LONG                                             2                                                  BRONZE                               £ 1.50

LARGE 8.0MM LONG                                                2                                                 BRONZE                               £ 1.75

-----

BRASS HANDRAIL BRACKETS.

Here we have five different sizes of turned handrail brackets. The "tails" are threaded. These units are ment to be fitted to upright surfaces with the exception on railway engines and the roof ' s of slipper launches etc. Now in packs of ten.

SIZE                  BORE SIZE          QUANTITY IN PACK                  MATERIAL                                 PRICE

1.6MM                       0.8MM                            10                                     BRASS                                   £2.20

2.0MM                       1.0MM                            10                                     BRASS                                   £2.20

2.5MM                       1.3MM                            10                                     BRASS                                   £2.20

3.5MM                       2.0MM                            10                                     BRASS                                   £2.60
                              

------


BRASS BOLLARDS, STANDARD OR BARRED AVAILABLE.

 LENGTH WIDTH HEIGHT MATERIAL QUANTITY TYPEPRICE 
 
 
 
    
 20.0 MM 6.0 MM 6.0 MM BRASS 2 STANDARD sold out
 23.0 MM 7.0 MM  8.0 MM BRASS 2 STANDARDsold out
   
   
 20.0 MM 6.0 MM 6.0 MM BRASS 2 BARRED £ 2 .50
 23.0 MM 7.0 MM 8.0 MM BRASS 2 BARRED £ 2. 60
       

These bollards are all solid turned brass, and finished to a very high standard. These will make that extra special finish to your project.

-------






STEAM WHISTLES.  

 Here we have two types of non - working steam whistles in cast bronze.  Both a superb copies of the original type of whistles and they look superb once fitted to your model.
  


Here is the Mk 1 type steam whistle priced at only £ 4. 75 each.



Here is the Mk 2 type whistle priced at only £ 4. 75 each.

------

DIRECTION FINDER - SINGLE     

A simple single loop direction finder in cast bronze with the loop being in brass, silver soldered to the stand to stop the loop moving. A lovely unit that will enhance and model fitted with this type of finder.

      

Direction finder loop priced at only £ 3.95 each.     


------     
PANAMA PORT.

Here we have a cast bronze panama port sized at 10.0mm x 8.0mm.



Panama port riced at only £ 1. 95 each.


------



ANCHOR CHAIN PORT.

Here we have a heavy duty anchor chain port size is 18.0mm x 15.0mm base. Cast in bronze they make a superb addition to your model come compleat with mounting bolts and nuts.



Anchor chain port sold individually not in pairs as not all vessels have two fitted. As can be seen from the picture these are substantial and very interesting ports.

Priced at only £ 4.75 each

-----

ANENOMETER

Here we have a cast brass ANEMOMETERS. These are at 1/12 scale and is only £5.95 for the kit of 3 parts. Please note that these are fully working units it that they will turn as the real unit by wind power.




1/12 SCALE ANEMOMETER
 SHIPS BOAT WITH ACCESSORIES.
 Here we have a ships boat in a red brown resin complete with all seats and stand ready to fit on your model. The boat comes complete with a pair a brown plastic oars and six cast brass rowlock's as well as a cast brass rudder and rudder arm combined. The length of the hull is 110mm bow to stern and 46mm in the beam, it has a height of 30.0mm amidships. As a casting a small amount of cleaning up will be requited as well as drilling of holes to fit the rowlocks and the rudder. The kit comes complete with mooring ropes and a cloth cover should you wish to fit one to the model. Priced at only £12.50 for the complete kit.
ONLY A FEW LEFT NOW!