BRASS FITTINGS. PAGE 3.
More great brass fittings for you.
CAST BRASS HAND WHEEL
PRICED AT ONLY £1.00 EACH
BRASS GATE VALVE HAND WHEEL.
These handwheels are priced at only £ 1.00 per wheel.
CAST BRASS 7.0MM HAND WHEEL.
PRICED AT ONLY £1.50 EACH
CAST BRASS 8.0MM 4 SPOKE HAND WHEEL.
Here we have a of bronze four bar handwheel for the scratch builder. Superbly made and priced at only £1. 50 each.
10.0MM 6 SPOKE HANDWHEEL.
Here we have another superb bronze handwheel for the scratch builder. 6 spoke priced at only £2.00 each.
CAST BRASS 12MM HAND WHEEL.
PRICED AT ONLY £2.45 EACH.
INLINE GATE VALVE AT 1:24 SCALE.
Here we have a superb inline gate valve at 1:24 scale in bronze with spigots to slide and glue 2.0mm or 3.0mm brass tube to. These units are priced at only £2.50 each.
INLINE STOP VALVE AT 1:24 SCALE.
Here we have a fabulous inline stop valve at 1:24 scale in bronze. The detailing is superb right down to the sub mini fixings on the flanges. These units are pure quality. The unit is part drilled to allow the modeller to drill out the body so that the unit can be slid over a tube or rod. Priced at only £4.40 each.
RIGHT ANGLED GATE VALVE
RIGHT ANGLED GATE VALVE ( ON THE RIGHT IN THE PICTURE) IS PRICED AT £ 4.40 EACH
SUPERB DETAIL WORK ON THESE CAST BRASS UNITS.
BRASS WORKING MUSHROOM VENTS.
These brass mushroom vents are supplied in kit form. The nature of the construction makes them into working vents. Very light in weight and with a superb finish. Simply assemble using a good quality super glue. These units will ventilate your hull or superstructure for you.
Example below of the 14 and 12 mm units.
DIA OF HEAD DIA OF TUBE TOTAL HEIGHT OF UNIT MATERIAL QUANTITY PRICE
6.0MM 3.0MM 11.0MM BRASS 1 £ 1. 85
8.0MM 4.0MM 12.0MM BRASS 1 £ 1. 85
10.0MM 5.0MM 22.0MM BRASS 1 £ 2. 25
12.0MM 6.0MM 22.0MM BRASS 1 £ 2. 25
14.0MM 7.0MM 23.0MM BRASS 1 £ 2. 25
MINI BRASS SOLID MUSHROOM VENTS - NEW
These new solid brass non working mushroom vents are ideal for fitting on smaller ship models to replace plastic or resin units. Available in 4mm, 3.5mm and 2.5mm dia. units. Priced at £0.35 each. Size is across the top of the unit not the base.
BRASS TACKLE HOOKS
This is a cast brass miniature tackle hook, one of three cast brass hooks we have just got into out range.
The hook is shown against a discarded staple to give an inpression of size. The staple is not included!!!
These units are priced at only £1.35 each.
CRANE HOOK - SMALL.
Again another one of the three hooks we now stock after being asked many times by our customer for these. Again cast in brass they are wonderful units at a very realistic price.
These hooks are priced at only £ 1.50 each. The pen is not included.
CRANE HOOK - LARGE.
As the above hook but obviously larger, again in cast brass. The pen is not included.
These hooks are priced as only £ 1.75 each.
COMPASS ROSE - FULLY WORKING.
Here we have a fully working compass, this is in liquid as per the originals and is only 14mm in dia hence it can be used as a 7 inch compass on a 1/12 scale model. We also carry a 12.0mm cpmpass rose, fully working but not in liquid. These 12.0mm units are intended for 1/24 scale and have a different card fitted to the one shown. Superbly detailed these are actual working compasses as issued to HM Forces.
Left hand picture is 1/12 scale unit at £2.00 each. Right hand unit is the 1/24 scale unit at only £2.00 each
Both are fully working compass heads - they look fantastic on a model!
1/24 SCALE FELLING AXE
Here we have a superb 1/24 scale felling axe. As with our 1/12 scale units they are supplied with wood handles for you to carve to shape, these make these units very realistic.
PRISED AT ONLY £2.75 FOR THE KIT.
1/24 SCALE SLEDGE HAMMER
Here we have a superb 1/24 scale sledge hammer. Supplied with real wood handle. Very realistic unit once made up and fitted to your model.
PRICED AT ONLY £2.50 EACH.